Autocad to Rhino – Modeling Objects from Plans & Sections (Spring 2017)

Autocad to Rhino – Modeling Objects from Plans & Sections (Spring 2017)

An overview of bringing an AutoCAD .dwg file into Rhino and using it as a base for a Rhino 3D model. Covers the use...
Lecture 206 – Modeling Components (Part 2) (Fall 2016)

Lecture 206 – Modeling Components (Part 2) (Fall 2016)

An overview of modeling a component including using sweeps. Includes discussion of sweeping with both 1 and 2 rails as well as using...
Lecture 230   2D Drawings from Rhino   Sections Fall 2016

Lecture 230 2D Drawings from Rhino Sections Fall 2016

An overview of how to make a line drawing section from a Rhino 3D model using the make2d command. Includes how to do...
Lecture 224 – 2D Drawings from Rhino – Elevations (Spring 2018)

Lecture 224 – 2D Drawings from Rhino – Elevations (Spring 2018)

An overview of how to make a line drawing elevation from a Rhino 3D model using the make2d command. Includes how to do...
Lecture 206 – Modeling Components – Day 2 (Fall 2015)

Lecture 206 – Modeling Components – Day 2 (Fall 2015)

An overview of modeling "tube like" components in Rhino. Introduction to the sweep 1 rail and sweep 2 rails commands in Rhino. source
AutoCad to Rhino – Objects from Plans and Sections (Spring 2017)

AutoCad to Rhino – Objects from Plans and Sections (Spring 2017)

An overview of bringing an AutoCAD .dwg file into Rhino and using it as a base for a Rhino 3D model. Covers the use...
Lecture 226 – 2D Drawings from Rhino – Plans (Spring 2018)

Lecture 226 – 2D Drawings from Rhino – Plans (Spring 2018)

An overview of how to make a line drawing plan from a Rhino 3D model using the make2d command. Includes how to do...
AutoCad to Rhino – Modelling Objects from Plans & Sections (Fall 2016)

AutoCad to Rhino – Modelling Objects from Plans & Sections (Fall 2016)

An overview of bringing an AutoCAD .dwg file into Rhino and using it as a base for a Rhino 3D model. Covers the use...
Lecture 213 – Topographic Physical Models (Part 2) (Spring 2017)

Lecture 213 – Topographic Physical Models (Part 2) (Spring 2017)

A complete overview of creating the files necessary to build a 3D physical model of topography. Includes bringing a mesh into Rhino from...
AutoCad to Rhino – Modeling Objects from Plans and Sections (Fall 2018)

AutoCad to Rhino – Modeling Objects from Plans and Sections (Fall 2018)

An overview of bringing an AutoCAD .dwg file into Rhino and using it as a base for a Rhino 3D model. Covers the use...