Tortuca: Hollow Glass Unit Bridge Prototype – Masoud Akbarzadeh – Project Award 2022



DigitalFUTURES Project Award

Tortuca: Hollow Glass Unit Bridge Prototype

Tortuca is an efficient and innovative structural system constructed by the dry assembly of thirteen hollow glass units. Each block is made of 1cm (~0.4″) glass deck plates and 2cm (0.7″) acrylic side plates precisely cut to match the structural geometry. The structure spans 3.2 meters (10.5 ft) with a mass of only 250kg (550 lbs), where the float glass is the primary load-bearing material. Moreover, a single person can assemble and disassemble the structure without needing a crane or additional labor. The geometry-based structural design methods of polyhedral graphic statics were used to design the optimized structural form of Tortuca. This research explores the potential of using an extremely delicate material such as float glass as a primary structural system in buildings and infrastructural projects. Furthermore, it shows how the use of construction materials can be minimized and how utilizing the material in its purest format would make the recycling process much easier after the structure’s life cycle.

Credits: Polyhedral Structures Laboratory, University of Pennsylvania, Villanova University, The City College of New York (CCNY), Technische Universität Darmstadt (TU Darmstadt), and Eventscape NY, Long Island City.

Principal Investigators: Masoud Akbarzadeh, Joseph Yost, Mohammad Bolhassani, Jens Schneider
Project Architect: Yao Lu
Project Team: Yao Lu, Ali Seyedahmadian, Philipp Amir Chhadeh, Matthew Cregan, Mohammad Bolhassani, Thomas Lee, Vincent Micozzi, Tristan Fischer-Smith, Joseph Robert Yost, Jens Schneider, Gareth Brennan, Masoud Akbarzadeh
Structural and Computational detailing: Yao Lu, Masoud Akbarzadeh
Structural Analysis: Philipp Amir Chhadeh and Mohammad Bolhassani
Structural Load testing: Joseph Robert Yost and Mathew Cregan
Fabrication and assembly: Yao Lu, Ali Seyedahmadian, Thomas Lee, Vincent Micozzi, Tristan Fischer-Smith, Gareth Brennan
Five-axis milling services: Eventscape NY
Plywood formwork: Eventscape NY
Metalworks: Eventscape NY
Five-axis waterjet services: AquaJet Services LLC

source

Save This Post

No account yet? Register